B&S CHALLENGER II 3136/2

Handhammered one piece Bell

Boxed Bronze Springs

Challenger Monel Pistons

Nickel Silver outer Slides

Stopper at the 3^rd valve slide

Bore: 11,73 mm
Bell: 12,10 cm

Options:

Gold Brass Bell (GB)

Heavy Gold Brass Bell (HGB)

Heavy Yellow Brass Bell (H)

Gold Brass Leadpipe (GL)

Reversed Leadpipe (LR)

Sterling Silver Leadpipe (STL)

Bright Silver Plating (S)

Gold Plating (AU)

Heavy Bottom Caps #2 (Height: 10mm) with O-Rings (set= 3 pieces)            

Heavy Bottom Caps #3 (Height: 11mm) with O-Rings (set= 3 pieces)

Heavy Bottom Caps #4 (Height: 13mm) with O-Rings (set= 3 pieces)

Gold Lacquer Top and Bottom Valve Caps and Finger Buttons

Additional Rounded Main Tuning Slide, Yellow Brass

Additional Rounded Main Tuning Slide, Gold Brass

Trigger for the 1^st and 3^rd valve slide

Set of Bb-Slides available, Yellow Brass

B&S CHALLENGER II 3136 TC

Handhammered one piece Bell

TC Bell in Gold Brass

Boxed Bronze Springs

Challenger Monel Pistons

Nickel Silver outer Slides

Stopper at the 3^rd valve slide

Bore: 11,73 mm
Bell: 12,10 cm

Options:

Reversed Leadpipe (LR)

Bright Silver Plating (S)

Gold Plating (AU)

Heavy Bottom Caps #2 (Height: 10mm) with O-Rings (set= 3 pieces)            

Heavy Bottom Caps #3 (Height: 11mm) with O-Rings (set= 3 pieces)

Heavy Bottom Caps #4 (Height: 13mm) with O-Rings (set= 3 pieces)

Gold Lacquer Top and Bottom Valve Caps and Finger Buttons

Additional Rounded Main Tuning Slide, Yellow Brass

Additional Rounded Main Tuning Slide, Gold Brass

Trigger for the 1^st and 3^rd valve slide

B&S CHALLENGER II 3136 JH

Handhammered one piece Bell

JH Leadpipe

Boxed Bronze Springs

Challenger Monel Pistons

Nickel Silver outer Slides

Stopper at the 3^rd valve slide

Bore: 11,73 mm
Bell: 12,10 cm

Options:

Bright Silver Plating (S)

Gold Plating (AU)

Heavy Bottom Caps #2 (Height: 10mm) with O-Rings (set= 3 pieces)            

Heavy Bottom Caps #3 (Height: 11mm) with O-Rings (set= 3 pieces)

Heavy Bottom Caps #4 (Height: 13mm) with O-Rings (set= 3 pieces)

Gold Lacquer Top and Bottom Valve Caps and Finger Buttons

Additional Rounded Main Tuning Slide, Yellow Brass

Additional Rounded Main Tuning Slide, Gold Brass

Trigger for the 1^st and 3^rd valve slide

B&S CHALLENGER II 3136 ST

Handhammered one piece Bell

Bell and Leadpipe in Sterling Silver (925 Ag)

Boxed Bronze Springs

Challenger Monel Pistons

Nickel Silver outer Slides

Stopper at the 3^rd valve slide

Equipped with Regular and Heavy Bottom Caps

Bore: 11,73 mm
Bell: 12,10 cm

Options:

Reversed Leadpipe (LR)

Bright Silver Plating (S)

Gold Plating (AU)

Heavy Bottom Caps #2 (Height: 10mm) with O-Rings (set= 3 pieces)            

Heavy Bottom Caps #3 (Height: 11mm) with O-Rings (set= 3 pieces)

Heavy Bottom Caps #4 (Height: 13mm) with O-Rings (set= 3 pieces)

Gold Lacquer Top and Bottom Valve Caps and Finger Buttons

Additional Rounded Main Tuning Slide, Yellow Brass

Additional Rounded Main Tuning Slide, Gold Brass

Trigger for the 1^st and 3^rd valve slide

B&S EXQUISITE

Handhammered lightweight one piece Yellow Brass Bell with French Bead wire

Boxed Bronze Springs

Hand Lapped Challenger Monel Pistons

Nickel Silver outer Slides

Snapp Off Stopper at the 3^rd valve slide

Stopper on the 1^st valve Slide

Bore: 11,66 mm
Bell: 12,20 cm

 

B&S CHALLENGER DCX

Handhammered one piece Bell

43 Bell

One Gold Brass Bell and Yellow Brass Bell with French bead wire

Reversed Leadpipe

Boxed Bronze Springs

Challenger Monel Pistons

Nickel Silver outer Slides

Trigger on the 1^st valve slide

Bore: 11,7 mm
Bell: 12,5 cm

Options:

Bright Silver Plating (S)

Gold Plating (AU)

Heavy Bottom Caps #2 (Height: 10mm) with O-Rings (set= 3 pieces)            

Heavy Bottom Caps #3 (Height: 11mm) with O-Rings (set= 3 pieces)

Heavy Bottom Caps #4 (Height: 13mm) with O-Rings (set= 3 pieces)

Gold Lacquer Top and Bottom Valve Caps and Finger Buttons